Posts

The 2016 Ford Police Interceptor Utility

FordPoliceUtility_01_HR

The top-selling law enforcement vehicle in the United States* is ready to hit the streets with a fresh look and new features this summer.

The 2016 Ford Police Interceptor Utility features:

  • New and refreshed front and rear design, new headlamps, a new instrument panel and an enhanced electrical system to help distribute electrical loads more efficiently.
  • One of the most important and recognizable features of Police Interceptor are the lights. The 2016 Police Interceptor Utility allows agencies to choose from up to 25 different patterns.
  • Available Surveillance Mode technology warns the driver when someone approaches the rear of the vehicle – orderable through Crown North America or Intermotive Vehicle Controls.
  • Liftgate release switch, accessible to occupants in the front.
  • A rear camera with washer is standard for the 2016 model.

The Ford Police Interceptor Utility comes standard with a 3.7-liter V6 producing 304 horsepower and 279 lb.-ft. of torque, while an available 3.5-liter EcoBoost® V6 makes 365 horsepower and 350 lb.-ft. of torque, allowing agencies to select the engine that best meets their patrol requirements. Interior and most exterior dimensions haven’t changed from the 2015 model to allow agencies to repurpose their aftermarket equipment.

12

2016 Ford Interceptor Utility – Options

 

 

Rockland: New Website – More Cabinet Options

Rockland Custom Cabinets has released their new website – www.rocklandcustomcabinets.com

Some items of note:

  • New Slide Out and Pop up SCBA holder
  • New Gear Storage system with air circulation – NFPA 1851
  • Electronic Entry Lock now offered
  • Temperature Control Units
  • Magnetic Command Boards now available
  • 120v, 12v USB ports now available
  • Sportsman Models available
  • Angled Consoles Available
  • Multi Panel Wide Body Consoles Available
  • Heavy Duty Pull Handles now available
  • Simplex lock with Key Override
  • Chrome large turn handle latch, round finger pull latches and compression latches now available

Plus all new literature – see it at the link below:

http://www.rocklandcustomcabinets.com/resources-and-support/downloads

2014-10-19_225235

Havis: New 2015 Tahoe Console Options

2015 Chevrolet Tahoe Police Pursuit Vehicle Specific 23″ Console

Part # C-VS-1013-TAH-1

C-VS-1013-TAH-1_A_6-14 (1)_600

Product Details:

  • Vehicle specific console for 2015 Chevrolet Tahoe police pursuit vehicle (ppv)
  • Mounts between bucket seats and fits to dash contour
  • Provides 2.5″ inches between console and seats for added driver comfort and accessory mounting
  • 23″ of internal control head and accessory mounting space
  • Includes 21″ inches of filler plates (FP) and/or equipment brackets (EB) to completely enclose mounting area less internal mount options
  • Includes 2″ plate C-EB20-USD-1P for mounting OEM 12 volt socket and aux input module (uses 2″ of internal console space in front 10″ section)
  • Includes internal front electrical equipment mounting shelf with removable front side trim panels for easy access
  • Passenger side front trim panel includes cutout for OEM 120 volt socket (blank plate also included if 120 volt socket is not used)
  • Includes two (2) 12 volt sockets mounted in top center reinforcement bracket
  • Console includes provisions for external side mount poles C-HDM-204 or C-HDM-214 (sold separately)
  • C-ARM-102, C-ARM-103 or C-ARM-105 arm rests recommended (sold separately)


2015 Chevrolet Tahoe Police Pursuit Vehicle Specific 12.5″ Wide 20″ Long Console

Part # C-VS-2000-TAH-2

C-VS-2000-TAH-2_A_6-2-14 (1)_600

Product Details:

  • 12.5″ wide 20″ vehicle specific console for 2015 Chevrolet Tahoe police pursuit vehicle (ppv)
  • This Angled console is vehicle specific and mounts cleanly between the bucket seats and fits to the dash contour for a custom look to your vehicle.
  • Includes 20″ of internal control head and accessory mounting space
  • Includes accessory pocket (13″ long x 2.5″ wide x 8″ deep) for single ream of 8 ½” x 11″ paper storage
  • Front top panel includes two (2) 12 volt sockets and cutout for OEM 12 aux input module
  • Console includes provisions for internal or external side mount poles C-HDM-204 or C-HDM-214 (sold separately)
  • Intended to be used for laptop on pole mount applications
  • Compatible with internal cup holder (C-CUP2-I-A06 ) and external cup holder (C-CUP2-E-C) sold separately
  • Only works with side mount arm rest part number C-ARM-102 (sold separately)
  • Includes filler plates (FP) and/or equipment brackets (EB) to completely enclose mounting area less internal mount options
  • Includes internal front electrical equipment mounting shelf with removable front side trim panels for easy access
  • Passenger side front trim panel includes cutout for OEM 120 volt socket (blank plate also included if 120 volt socket is not used)
  • No additional vehicle mounting kit required
  • If using console with a vertical gun rack between seats, a partition with gun alcove is recommended
  • Housing measures x 11.87″ high front / 10″ high rear x 12.5″ wide x 23″ long (Plus 11″ front side panels)
  • Does not accept C-SM Series brackets

 

Segway: SE-3 Patroller Video & Info Sheet

2014-07-06_211034

SE3PatrollerSpecSheet